1F–148 ENGINE CONTROLS
DAEWOO M-150 BL2
DTC P0327 – Knock Sensor Circuit (Cont’d)
Step Action Value(s) Yes No
12
1. Using the scan tool, clear the DTCs.
D Start the engine and idle at normal operating
temperature.
D Operate the vehicle within the conditions for
setting this DTC as specified in the supporting
text.
Does the scan tool indicate that this diagnostic has
run and passed?
–
Go to Step 13 Go to Step 2
13
Check if any additional DTCs are set.
Are any DTCs displayed that have not been
diagnosed?
–
Go to
Applicable DTC
table
System OK
To Next Page
Loading...
