1F–280 ENGINE CONTROLS
DAEWOO M-150 BL2
SYMPTOM DIAGNOSIS
IMPORTANT PRELIMINARY CHECKS
Important: Several symptom procedures call for a care-
ful visual/physical inspection. Always perform the visual/
physical test first. Visual inspections may lead to
correcting a problem without further checks and can
save valuable time.
Step Action Value(s) Yes No
1
Perform the On-Board Diagnostic (EOBD) System
Check.
Are any Diagnostic Trouble Code(s) (DTCs) stored
in the Engine Control Module (ECM) memory?
–
Go to
Appropriate
DTC Table Go to Step 2
2
1. Inspect all of the ECM ground connections.
2. Inspect all of the vacuum hoses for splits, kinks,
and proper connections.
3. Check for air leaks at all of the mounting areas of
the intake manifold sealing surfaces.
4. Inspect the ignition wires for cracking, hardness,
proper routing, and carbon tracking.
5. Inspect the wiring for proper connections,
pinches, and cuts.
Are all checks complete?
–
Go to
Appropriate
Symptom Table
–
To Next Page
