ENGINE CONTROLS 1F–313
DAEWOO M-150 BL2
D12F543B
Installation Procedure
1. Install the engine coolant temperature sensor.
Tighten
Tighten the engine coolant temperature sensor to
8–12 NSm (71–106 lb-ft).
D102F544
INTAKE AIR TEMPERATURE (IAT)
SENSOR
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the intake air temperature (IAT) sensor.
D Disconnect the IAT sensor connector (1)
D Disconnect the IAT sensor.
20–30 NSm
D12F545A
Installation Procedure
1. Install in the reverse order of removal.
2. Install the IAT sensor.
Tighten
Tighten the IAT sensor to 20–30 NSm (15–22 lb-ft).
To Next Page
Loading...
