4F–18 ANTILOCK BRAKE SYSTEM
DAEWOO M-150 BL2
DTC 0354 – Left Front Wheel Speed Sensor Circuit Open or Shorted (Cont’d)
Step
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Action
Value(s)
Yes
No
ÑÑ
10
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Use a DVM to measure the resistance between
ground and terminal 25 of the EBCM connector.
Does the DVM show the specified value?
ÑÑÑ
1
ÑÑÑÑÑ
Go to Step 12
ÑÑÑÑ
Go to Step 11
ÑÑ
11
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Repair the short to ground in circuit YEL.
Is the repair complete?
ÑÑÑ
–
ÑÑÑÑÑ
System OK
ÑÑÑÑ
–
ÑÑ
ÑÑ
ÑÑ
ÑÑ
12
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
1. Reconnect all of the connectors.
2. Turn the ignition to ON.
3. Use a DVM to measure the voltage between
ground and terminal 14 of EBCM connector.
Is the voltage within the specified value?
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
0 v
ÑÑÑÑÑ
ÑÑÑÑÑ
ÑÑÑÑÑ
ÑÑÑÑÑ
Go to Step 14
ÑÑÑÑ
ÑÑÑÑ
ÑÑÑÑ
ÑÑÑÑ
Go to Step 13
ÑÑ
13
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Repair the short to voltage in circuit DK BLU.
Is the repair complete?
ÑÑÑ
–
ÑÑÑÑÑ
System OK
ÑÑÑÑ
–
ÑÑ
14
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Use a DVM to measure the voltage between ground
and terminal 25 of EBCM connector.
Is the voltage within the specified value?
ÑÑÑ
0 v
ÑÑÑÑÑ
Go to Step 16
ÑÑÑÑ
Go to Step 15
ÑÑ
15
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Repair the short to voltage in circuit YEL.
Is the repair complete?
ÑÑÑ
–
ÑÑÑÑÑ
System OK
ÑÑÑÑ
–
ÑÑ
16
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Replace the EBCM.
Is the repair complete?
ÑÑÑ
–
ÑÑÑÑÑ
System OK
ÑÑÑÑ
–
To Next Page
Loading...
