4F–26 ANTILOCK BRAKE SYSTEM
DAEWOO M-150 BL2
DTC 0404 – Right Front Wheel Speed Sensor Circuit Open or Shorted (Cont’d)
Step
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Action
Value(s)
Yes
No
ÑÑ
10
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Use a DVM to measure the resistance between
ground and terminal 13 of the EBCM connector.
Does the DVM show the specified value?
ÑÑÑ
1
ÑÑÑÑÑ
Go to Step 12
ÑÑÑÑ
Go to Step 11
ÑÑ
11
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Repair the short to ground in circuit BRN/DK GRN.
Is the repair complete?
ÑÑÑ
–
ÑÑÑÑÑ
System OK
ÑÑÑÑ
–
ÑÑ
ÑÑ
ÑÑ
ÑÑ
12
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
1. Reconnect all of the connectors.
2. Turn the ignition to ON.
3. Use a DVM to measure the voltage between
ground and terminal 12 of EBCM connector.
Is the voltage within the specified value?
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
0 v
ÑÑÑÑÑ
ÑÑÑÑÑ
ÑÑÑÑÑ
ÑÑÑÑÑ
Go to Step 14
ÑÑÑÑ
ÑÑÑÑ
ÑÑÑÑ
ÑÑÑÑ
Go to Step 13
ÑÑ
13
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Repair the short to voltage in circuit DK GRN/BLK.
Is the repair complete?
ÑÑÑ
–
ÑÑÑÑÑ
System OK
ÑÑÑÑ
–
ÑÑ
14
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Use a DVM to measure the voltage between ground
and terminal 13 of EBCM connector.
Is the voltage within the specified value?
ÑÑÑ
0 v
ÑÑÑÑÑ
Go to Step 16
ÑÑÑÑ
Go to Step 15
ÑÑ
15
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Repair the short to voltage in circuit BRN/DK GRN.
Is the repair complete?
ÑÑÑ
–
ÑÑÑÑÑ
System OK
ÑÑÑÑ
–
ÑÑ
16
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Replace the EBCM.
Is the repair complete?
ÑÑÑ
–
ÑÑÑÑÑ
System OK
ÑÑÑÑ
–
To Next Page
Loading...
