MANUAL STEERING GEAR 6D–5
DAEWOO M-150 BL2
STRAIGHT-AHEAD CHECK
After all the necessary operations on the steering gear
are completed, check the exact straight-ahead position
of the steering in each case.
With the vehicle on the floor, place the steering wheel in
the straight-ahead position. Mark the centerline of both
tires on the floor. Turn the steering wheel all the way to
the right and mark the new centerline of both tires on the
floor.
Application
Tire
Specified Valve
145, 155 37.5 – 41.5_
Inside Angle
175 32.9 – 36.9_
145, 155 31.5 – 35.5_
Outside Angle
175
28.5 – 32.5_
D105B301
Front
Outside Angle
Inside Angle
Straight Ahead Check Table
Step
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Action
Value(s)
Yes
No
ÁÁ
ÁÁ
1
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Place the steering wheel in the straight-ahead posi-
tion.
Is the wheel in the correct position?
ÁÁÁ
ÁÁÁ
–
ÁÁÁÁÁ
ÁÁÁÁÁ
Go to Step 2
ÁÁÁÁ
ÁÁÁÁ
–
ÁÁ
2
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Is the steering wheel off center by more than 5 de-
grees?
ÁÁÁ
–
ÁÁÁÁÁ
Go to Step 4
ÁÁÁÁ
Go to Step 5
ÁÁ
3
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
The pinion is displaced on the rack. The steering
pinion position must be corrected.
Is the repair complete?
ÁÁÁ
–
ÁÁÁÁÁ
Go to Step 2
ÁÁÁÁ
–
ÁÁ
ÁÁ
4
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Remove steering wheel and center on the spindle
splines.
Is the repair complete?
ÁÁÁ
ÁÁÁ
–
ÁÁÁÁÁ
ÁÁÁÁÁ
Go to Step 2
ÁÁÁÁ
ÁÁÁÁ
–
ÁÁ
ÁÁ
5
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Turn the steering wheel all the way to the right. Mea-
sure the inner and the outer angles of the tire cent-
erline compared to the straight-ahead centerline. Do
the angles match the value specified?
ÁÁÁ
ÁÁÁ
Refer to
“Straight–
Ahead Check”
in this section
ÁÁÁÁÁ
ÁÁÁÁÁ
System OK
ÁÁÁÁ
ÁÁÁÁ
Go to Step 6
ÁÁ
ÁÁ
6
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
The rack assembly was not assembled correctly.
Repair as needed.
Is the repair complete?
ÁÁÁ
ÁÁÁ
–
ÁÁÁÁÁ
ÁÁÁÁÁ
Go to Step 5
ÁÁÁÁ
ÁÁÁÁ
–