134 Ethernet Configuration Commands
www.dell.com | support.dell.com
The following table describes the fields shown in the display:
The following example displays counters for port g1.
Console# show interfaces counters ethernet g1
Port
InOctets InUcastPkts InMcastPkts InBcastPkts
------ ----------- -------------- -------------- -----------
g1 183892 1289 987 8
Port
OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
------ ----------- -------------- -------------- -----------
g1 9188 9 8 0
FCS Errors: 8
Single Collision Frames: 0
Multiple Collision Frames: 0
SQE Test Errors: 0
Deferred Transmissions: 0
Late Collisions: 0
Excessive Collisions: 0
Internal MAC Tx Errors: 0
Carrier Sense Errors: 0
Oversize Packets: 0
Internal MAC Rx Errors: 0
Received Pause Frames: 0
Transmitted Pause Frames: 0
Field Description
InOctets Counted received octets.
InUcastPkts Counted received unicast packets.
To Next Page
Loading...
