Edge-Core ECS4620-28T - Page 1240

Chapter 10 | Access Control Lists
ACL Information
– 410 –
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
acl-name – Name of the ACL. (Maximum length: 32 characters)
Command Mode
Privileged Exec
Example
Console#clear access-list hardware counters
Console#
show access-group This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
Console#show access-group
Interface ethernet 1/2
IP access-list david
MAC access-list jerry
Console#
show access-list This command shows all ACLs and associated rules.
Syntax
show access-list
[[arp [acl-name]] |
[ip [extended [acl-name] | standard [acl-name]] |
[ipv6 [extended [acl-name] | standard [acl-name]] |
[mac [acl-name]] | [tcam-utilization] | [hardware counters]]
arp – Shows ingress or egress rules for ARP ACLs.
hardware counters – Shows statistics for all ACLs.
8
ip extended – Shows ingress or egress rules for Extended IPv4 ACLs.
ip standard – Shows ingress or egress rules for Standard IPv4 ACLs.
ipv6 extended – Shows ingress or egress rules for Extended IPv6 ACLs.
ipv6 standard – Shows ingress or egress rules for Standard IPv6 ACLs.
8. Due to a hardware limitation, this option only displays statistics for permit rules.