Chapter 24
| Multicast Filtering Commands
MVR for IPv4
– 731 –
The following shows MVR query-related statistics:
Console#show mvr domain 1 statistics query
Domain 1:
Other Querier : None
Other Querier Expire : 0(m):0(s)
Other Querier Uptime : 0(h):0(m):0(s)
Self Querier : None
Self Querier Expire : 0(m):30(s)
Self Querier Uptime : 0(h):9(m):55(s)
General Query Received : 0
General Query Sent : 8
Specific Query Received : 0
Specific Query Sent : 3
Warn Rate Limit : 0 sec.
V1 Warning Count : 0
V2 Warning Count : 0
V3 Warning Count : 0
Console#
G Query The number of general query messages sent from this interface.
G(-S)-S Query The number of group specific or group-and-source specific query
messages sent from this interface.
Table 139: show mvr statistics query - display description
Field Description
Other Querier The IP address of the querier on this interface.
Other Querier Expire The time after which this querier is assumed to have expired.
Other Querier Uptime Other querier’s time up.
Self Querier This querier’s IP address.
Self Querier Expire This querier’s expire time.
Self Querier Uptime This querier’s time up.
General Query Received The number of general queries received on this interface.
General Query Sent The number of general queries sent from this interface.
Specific Query Received The number of specific queries received on this interface.
Specific Query Sent The number of specific queries sent from this interface.
Warn Rate Limit Count down from 15 seconds after receiving a Query different
from the configured version.
V# Warning Count Number of queries received on MVR that were configured for IGMP
version 1, 2 or 3.
Table 138: show mvr statistics output - display description (Continued)
Field Description
To Next Page
Loading...
Need help?
General