Chapter 14
| Multicast Filtering
Layer 2 IGMP (Snooping and Query for IPv4)
– 559 –
◆ V3 Warning Count – The number of times the query version received
(Version 3) does not match the version configured for this interface.
VLAN, Port, and Trunk Statistics
Input Statistics
◆ Report – The number of IGMP membership reports received on this interface.
◆ Leave – The number of leave messages received on this interface.
◆ G Query – The number of general query messages received on this interface.
◆ G(-S)-S Query – The number of group specific or group-and-source specific
query messages received on this interface.
◆ Drop – The number of times a report, leave or query was dropped. Packets may
be dropped due to invalid format, rate limiting, packet content not allowed, or
IGMP group report received.
◆ Join Success – The number of times a multicast group was successfully joined.
◆ Group – The number of IGMP groups active on this interface.
Output Statistics
◆ Report – The number of IGMP membership reports sent from this interface.
◆ Leave – The number of leave messages sent from this interface.
◆ G Query – The number of general query messages sent from this interface.
◆ G(-S)-S Query – The number of group specific or group-and-source specific
query messages sent from this interface.
Web Interface
To display statistics for IGMP snooping query-related messages:
1. Click Multicast, IGMP Snooping, Statistics.
2. Select Show Query Statistics from the Action list.
3. Select a VLAN.
To Next Page
Loading...
