How to Use This Guide
– 4 –
Conventions The following conventions are used throughout this guide to show information:
Note:
Emphasizes important information or calls your attention to related features
or instructions.
Caution:
Alerts you to a potential hazard that could cause loss of data, or damage
the system or equipment.
Warning:
Alerts you to a potential hazard that could cause personal injury.
Revision History This section summarizes the changes in each revision of this guide.
December 2014 Revision
This is the fourth version of this guide. This guide is valid for software release
v1.2.2.0. It contains the following changes:
◆ Added information for ECS4620-28F-DC.
July 2014 Revision
This is the third version of this guide. This guide is valid for software release v1.2.2.0.
It contains the following changes:
◆ Added information for ECS4620-28T-DC.
◆ Updated usage information for the command "mac-learning" on page 304.
◆ Updated syntax and usage information for the command "ip source-guard
binding" on page 353.
◆ Updated usage information for the command "ip source-guard mode" on
page 357.
◆ Added the command "loopback-detection action" on page 492.
April 2014 Revision
This is the second version of this guide. This guide is valid for software release
v1.2.1.3. It contains the following changes:
◆ Added information for ECS4620-28F, ECS4620-28T, and ECS4620-28P.
◆ Extended configurable VLAN range from 1-4093 to 1-4094.
◆ Added "Stack Operations" on page 69.
To Next Page
Loading...
