Chapter 3
| General Commands
– 110 –
Example
Console>enable
Password: [privileged level password]
Console#
Related Commands
disable (112)
enable password (238)
quit This command exits the configuration program.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
Console#quit
Press ENTER to start session
User Access Verification
Username:
show history This command shows the contents of the command history buffer.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The history buffer size is fixed at 10 Execution commands and 10 Configuration
commands.
To Next Page
Loading...
Need help?
General