Command Line Interface
1112 1553-KDU 137 365 Uen D 2006-06-16
7.27.6 report-interval
This command specifies how often to propagate the complete set of routing
tables to other neighbor DVMRP routers. Use the no form to restore the default
value.
Syntax
report-interval <seconds>
no report-interval
seconds - Interval between sending the complete set of routing tables.
(Range: 1-65535)
Default Setting
60 seconds
Command Mode
Router Configuration
Example
7.27.7 flash-update-interval
This command specifies how often to send trigger updates, which reflect
changes in the network topology. Use the no form to restore the default value.
Syntax
flash-update-interval <seconds>
no flash-update-interval
seconds - Interval between sending flash updates when network
topology changes have occurred. (Range: 1-65535)
Console(config-router)#report-interval 90
Console(config-router)#
To Next Page
Loading...
