Command Line Interface
11351553-KDU 137 365 Uen D 2006-06-16
ip pim register-
checksum-
withdata
Calculates the register checksum over the whole
packet instead of just the packet header
GC 1153
ip pim
sparse-mode
Enables PIM-SM on the specified interface IC 1154
ip pim
dr-priority
Sets the priority value for a DR candidate IC 1155
ip pim
hello-interval
Sets the interval at which periodic hellos are sent
out on all interfaces
IC 1157
ip pim
hello-holdtime
Sets the timer that detects whether a neighbor
router is still alive and sending hello messages
IC 1158
clear ip pim
bsr rp-set
Clears the RP entries learned through the BSR PE 1160
show ip pim Shows the global settings for PIM-SM PE 1161
show ip pim
bsr-router
Displays information about the BSR PE 1163
show ip pim rp
mapping
Display active RPs and associated multicast
routing entries
PE 1165
show ip pim
rp-hash
Displays the RP used for the specified multicast
group
PE 1166
show router pim Displays the global PIM configuration settings PE 1130
show ip pim
interface
Displays information about interfaces configured
for PIM
NE,
PE
1131
show ip pim
neighbor
Displays information about PIM neighbors PE 1132
show ip mroute Shows the IP multicast routing table PE 1105
Command Function Mode Page
To Next Page
Loading...
