Command Line Interface
580 1553-KDU 137 365 Uen D 2006-06-16
Command Mode
Line Configuration
Command Usage
Communication protocols provided by devices such as terminals and
modems often require a specific parity bit setting.
Example
To specify no parity, enter this command:
7.5.28 speed
Use this command to set the terminal line's baud rate. This command sets both
the transmit (to terminal) and receive (from terminal) speeds. Use the no form
to restore the default setting.
Syntax
speed <bps>
no speed
bps - Baud rate in bits per second.
(Options: 9600, 19200, 38400, 57600, or 115200 bps)
Default Setting
9600 bps
Command Mode
Line Configuration
Console(config-line)#parity none
Console(config-line)#
To Next Page
Loading...
