Command Line Interface
586 1553-KDU 137 365 Uen D 2006-06-16
Table 44 Logging Levels
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 - 0)
Command Mode
Global Configuration
Command Usage
The message level specified for flash memory must be a higher priority
(numerically lower) than that specified for RAM.
Level Name Level Description
debugging 7 Debugging messages
informational 6 Informational messages only
notifications 5 Normal but significant condition, such
as cold start
warnings 4 Warning conditions (for example, return
false, unexpected return)
errors 3 Error conditions (for example, invalid
input, default used)
critical 2 Critical conditions (for example,
memory allocation, or free memory
error - resource exhausted)
alerts 1 Immediate action needed
emergencies 0 System unusable
* There are only Level 2, 5 and 6 error messages for the current firmware
release.
To Next Page
Loading...
