Command Line Interface
5871553-KDU 137 365 Uen D 2006-06-16
Example
7.5.34 logging host
This command adds a syslog server host IP address that will receive logging
messages. Use the no form to remove a syslog server host.
Syntax
[no] logging host <host_ip_address>
host_ip_address - The IP address of a syslog server.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Using this command more than once builds up a list of host IP
addresses.
• The maximum number of host IP addresses allowed is five.
Example
Console(config)#logging history ram 0
Console(config)#
Console(config)#logging host 10.1.0.3
Console(config)#
To Next Page
Loading...
