Command Line Interface
828 1553-KDU 137 365 Uen D 2006-06-16
Example
Related Commands
port (section 7.16.5 on page 830)
7.16.3 hellotime
This command sets the interval at which the master node sends health-check
packets on the domain ring.
Syntax
hellotime <seconds>
seconds - The interval at which the master node sends health-check
packets. (Range: 1-3 seconds)
Default Setting
1 second
Command Mode
EAPS Domain Configuration
Command Usage
The hello time should be set on the master node. Once set, the master node
will send a health-check packet at the interval specified by this timer to all
transit nodes. The transit nodes check for a health-check packet at the
interval specified by the failtime command (section 7.16.4 on page 829).
Console(config-eaps)#mode master
Console(config-eaps)#
To Next Page
Loading...
