Command Line Interface
836 1553-KDU 137 365 Uen D 2006-06-16
7.16.10 show eaps
This command displays status information for configured EAPS domains.
Syntax
show eaps [<domain-name>]
domain-name - Name of a specific EAPS domain. (Range: 1-32
characters)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Enter the show eaps command without any argument to display a
summary of status information for all configured EAPS domains.
• Enter the show eaps command followed by a domain name to display
detailed status information for the specified domain.
Example
This example displays a summary of all the EAPS domains configured on the
ECN330-switch.
Console#show eaps
EAPS Enabled: Yes
Number of EAPS instances: 1
Domain r&d:
State Mode En PriPort SecPort CVID Vcount
Init M Y 25 26 2 1
Console#
To Next Page
Loading...
