Configuring the ECN330-switch
831553-KDU 137 365 Uen D 2006-06-16
Click IP, Global Setting. If the ECN330-switch and management stations exist on
other network segments, then specify the default gateway, and click Apply.
Figure 17 Default Gateway
CLI – Specify the management interface, IP address and default gateway.
Console#config
Console(config)#interface vlan 1
Console(config-if)#ip address 10.1.0.253 255.255.255.0
Console(config-if)#exit
Console(config)#ip default-gateway 10.1.0.254
Console(config)#
To Next Page
Loading...
