Configuring the ECN330-switch
891553-KDU 137 365 Uen D 2006-06-16
6.3.10 Saving or Restoring Configuration Settings
Configuration settings can be uploaded/downloaded to/from a TFTP server. The
configuration file can be later downloaded to restore the ECN330-switch’s
settings.
Command Attributes
• File Transfer Method – The configuration copy operation includes these
options:
• file to file – Copies a file within the ECN330-switch directory,
assigning it a new name.
• file to running-config – Copies a file in the ECN330-switch to the
running configuration.
• file to startup-config – Copies a file in the ECN330-switch to the
startup configuration.
• file to tftp – Copies a file from the ECN330-switch to a TFTP server.
• running-config to file – Copies the running configuration to a file.
• running-config to startup-config – Copies the running config to the
startup config.
• running-config to tftp – Copies the running configuration to a TFTP
server.
• startup-config to file – Copies the startup configuration to a file on
the ECN330-switch.
• startup-config to running-config – Copies the startup config to the
running config.
• startup-config to tftp – Copies the startup configuration to a TFTP
server.
• tftp to file – Copies a file from a TFTP server to the ECN330-switch.
• tftp to running-config – Copies a file from a TFTP server to the
running config.
• tftp to startup-config – Copies a file from a TFTP server to the
startup config.
• TFTP Server IP Address – The IP address of a TFTP server.
To Next Page
Loading...
