178
Deleting Clips (Mira only)
(1) Refer to "Changing CLIP ID" above to select a Clip.
(2) Turn F3 to select DELETE and then press F3.
VTR/VDCP:CLIP0001 : : 1/1
CLIP :CLIP0002 :>DELETE :>CANCEL :
(3) Turn F3 to select OK. Then press F3 to delete the Clip. The Clip in the connected device
is also deleted. To cancel the operation, select CNCL and press F3.
Clearing Playlists
(1) Display PAGE 5 of the [SETUP - EXT I/F - VTR/VDCP] menu.
(2) Set 1 or 2 under SELECT to select Playlist 1 or 2.
(3) Turn F4 to select CLEAR, then press F4.
EXT I/F :SELECT : :FUNC : 5/7
VTR/VDCP:=1 :>ID SET:>TC SET: >CLEAR:
(4) Turn F3 to select OK. Then press F3 to clear the playlist data. To cancel the operation,
select CNCL and press F3.
Copying Data between two Playlists
(1) Display PAGE 5 of the [SETUP - EXT I/F - VTR/VDCP] menu.
(2) Set 1 or 2 under SELECT to select Playlist 1 or 2 for copying data.
(3) Turn F4 to select COPY, and then press F4.
EXT I/F :SELECT : :FUNC : 5/7
VTR/VDCP:=1 :>ID SET:>TC SET: >COPY :
(4) Turn F1 to select a copy destination (Playlist 1 or 2).
EXT I/F :SELECT : :FUNC : 5/7
VTR/VDCP:=2 :>ID SET:>TC SET: >PASTE:
(5) Turn F4 to select PASTE, and then press F4. The data is copied from one playlist to the
other.
Creating New Clips (Recording using VDCP)
Recording video and creating new Clips are possible. They are stored in the connected
device. To create a new clip, proceed as follows:
(1) Display PAGE 7 of the [SETUP - EXT I/F - VTR/VDCP] menu.
(2) Press F3 to change to ID input mode.
(3)To enter a new CLIP ID, set a character for each cell: Turn F3 to select the first cell, then
turn F4 to select a character for it. Repeat this process until the new ID is set. Press F3 to
apply the new ID.
EXT I/F :REC DURATION :REC ID:NEW0001 : 7/7
VTR/VDCP:=00:00:15:00 :>RENAME : >REC :
To Next Page
Loading...
Need help?
General
