Keysight E4981A - Sorting Measurement Results Using Comparator

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 139
Measurement Applications (Sample Programs)
Sorting Measurement Results Using Comparator
Sorting Measurement Results Using Comparator
This application program sorts the measurement results using the comparator
function.
The program of Example 9-14 is described in detail below. Each explanation
below is inserted as a comment line in the program. For details on the VISA
functions, refer to the I/O Library Suite manual.
Configuration Define Variables and initialize the program.
Open Instrument Assigns a USB address or GPIB address to the I/O bus.
Setup Start Presets the E4981A. Sets the comparator limit values for
Bin1,Bin2 and Bin3 of the E4981A. Sets the trigger
conditions of the E4981A.
Measurement Enables Bin 1 to 3. Disables Bin 4 to 9. Reads measurement
values using *TRG command fifty times. Displays the bin
values.
Setup End Closes the I/O bus.
ErrorProc Displays an error number when an error occurs.
ErrorCheck A subroutine to check whether an error occurs when the IO
Library Suite function is executed.
SelectMode A subroutine to change assignment of the I/O bus and
address setting according to the connection type i.e. USB
or GPIB between the E4981A and a PC.