Keysight E4981A - Data:feed:control:buf2[:State]

198 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:DATA:FEED:CONTrol:BUF2[:STATe]
Syntax :DATA:FEED:CONTrol:BUF2[:STATe] {NEVer|ALWays}
:DATA:FEED:CONTrol:BUF2[:STATe]?
Description Determines whether the measurement data is fed into data buffer 2 never or
always.
Parameters
Query response {ALW|NEV}<newline><^END>
Related commands :DATA:FEED:BUF1 on page 195
:DATA:POINts:BUF1 on page 202
Equivalent key
sequence
[Save/Recall] - CATALOG - SAVE DATA - START LOG
Description
ALWays Feeds the measurement data into the data buffer 2 specified with
BUF2 each time a measurement is performed.
NEVer (initial
value)
Does not feed the measurement data into the data buffer 2
specified with BUF2.