Keysight E4981A Programming Manual

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 243
Command Reference
E4981A SCPI Commands
[:SENSe]:CORRection:MULTiple:CHANnel
Syntax [:SENSe]:CORRection:MULTiple:CHANnel <numeric>
[:SENSe]:CORRection:MULTiple:CHANnel?
Description Specifies a channel number used in the multi-correction function.
You can also specify the channel number via the scanner interface.
Parameters
If the specified parameter is out of the allowable setup range, an error occurs.
MAX or MIN can be used to specify the parameters.
Query response {numeric}<newline><^END>
Equivalent key
sequence
[Meas Setup] - CORRECTION - CH
A channel number specified through the interface overrides a channel
number selected with this command.
<numeric>
Description The desired channel number.
Range 0 to 255
Initial value 0
Resolution 1

Keysight E4981A Specifications

General

Brand	Keysight
Model	E4981A
Category	Measuring Instruments
Language	English