Keysight E4981A - Data:feed:control[:State]

200 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:DATA:FEED:CONTrol[:STATe]
Syntax :DATA:FEED:CONTrol[:STATe] {BUF1|BUF2|BUF3}, {NEVer|ALWays}
:DATA:FEED:CONTrol[:STATe]? {BUF1|BUF2|BUF3}
Description Determines whether to feed the measurement data into data buffer 1, data
buffer 2, or data buffer 3.
Parameters
Query response {NEV|ALW}<newline><^END>
Related commands :DATA:FEED:BUF1 on page 195
:DATA:POINts:BUF1 on page 202
Equivalent key
sequence
No equivalent key is available on the front panel.
Description
ALWays Feeds the measurement data into the data buffer specified with
BUF1/BUF2/BUF3 each time a measurement is performed.
NEVer Does not feed the measurement data into the data buffer specified
with BUF1/BUF2/BUF3.
Description
BUF1 Specifies data buffer 1 as the buffer to which the setup is applied
or reads out the setup of data buffer 1.
BUF2 Specifies data buffer 2 as the buffer to which the setup is applied
or reads out the setup of data buffer 2.
BUF3 Specifies data buffer 3 as the buffer to which the setup is applied
or reads out the setup of data buffer 3.