Keysight E4981A - [:Sense][:Fimpedance]:Contact1:Verify:buf2:Feed:control[:State]

258 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:FEED:CONTrol[:STATe]
Syntax [:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:FEED:CONTrol[:STATe]
{NEVer|ALWays}
[:SENSe][:FIMPedance]:CONTact:VERify:BUF2:FEED:CONTrol[:STATe]?
Description Determines whether to get data buffer2 for Contact 1.
Parameters
Query response {NEV|ALW}<newline><^END>
Related commands [:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:DATA? on page 256
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:FEED:CONTrol:INTer
val on page 257
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:POINts on page 259
Equivalent key
sequence
No equivalent key is available on the front panel.
Description
ALWays Feeds the contact check measurement data into the data buffer2
NEVer (Initial
value)
Does not feeds the contact check measurement data into the data
buffer2