Keysight E4981A Programming Manual

272 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:STATus:QUEStionable:CONDition?
Syntax :STATus:QUEStionable:CONDition?
Description Reads out the value of the Questionable Status Condition register. However,
the E4981A does not support the Questionable Status register. Therefore,
executing this command has no effect.(Query only)
Query response {numeric}<newline><^END>
The E4981A does not support the Questionable Status register. Therefore, the
query response is always 0.
Equivalent key
sequence
No equivalent key is available on the front panel.
:STATus:QUEStionable:ENABle
Syntax :STATus:QUEStionable:ENABle <numeric>
:STATus:QUEStionable:ENABle?
Description Sets the value of the Questionable Status Enable register. However, the
E4981A does not support the Questionable Status register. Therefore,
executing this command has no effect.
Query response {numeric}<newline><^END>
Equivalent key
sequence
No equivalent key is available on the front panel.
:STATus:QUEStionable[:EVENt]?
Syntax :STATus:QUEStionable[:EVENt]?
Description Reads out the value of the Questionable Status Event register. However, the
E4981A does not support the Questionable Status register. Therefore,
executing this command has no effect.(Query only)
Query response {numeric}<newline><^END>
The E4981A does not support the Questionable Status register. Therefore, the
query response is always 0.
Equivalent key
sequence
No equivalent key is available on the front panel.

Keysight E4981A Specifications

General

Brand	Keysight
Model	E4981A
Category	Measuring Instruments
Language	English