Keysight E4981A - System:communicate:lan[:Self]:Mac; System:communicate:lan[:Self]:Preset; System:communicate:lan[:Self]:Restart; System:communicate:lan[:Self]:Smask

278 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:SYSTem:COMMunicate:LAN[:SELF]:MAC?
Syntax :SYSTem:COMMunicate:LAN[:SELF]:MAC?
Description Returns the MAC address. (Query Only)
Query response {“string”}<newline><^END>
Equivalent key No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:PRESet
Syntax :SYSTem:COMMunicate:LAN[:SELF]:PRESet
Description Presets the network settings and restarts the network. (No Query)
Equivalent key [Preset] - LAN RESET- OK
:SYSTem:COMMunicate:LAN[:SELF]:RESTart
Syntax :SYSTem:COMMunicate:LAN[:SELF]:RESTart
Description Restarts the network (No Query)
Equivalent key [System] - SYSTEM CONFIG - IP CONFIG - RESTART NETWORK
:SYSTem:COMMunicate:LAN[:SELF]:SMASk
Syntax :SYSTem:COMMunicate:LAN[:SELF]:SMASk <String>
:SYSTem:COMMunicate:LAN[:SELF]:SMASk?
Description Sets the static Subnet Mask.
Parameter
Query response {“string”}<newline><^END>
Equivalent key [System] - SYSTEM CONFIG - MANUAL SUBNET MASK- ENTER
<String>
Initial (Factory set) value "255.255.255.0"
The value of this command is not changed with *RST and :SYSTem:PRESet
and is only changed with Factory Default reset (available only through
Front Panel).