Keysight E4981A - Display[:Window][:State]

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 215
Command Reference
E4981A SCPI Commands
:DISPlay[:WINDow][:STATe]
Syntax :DISPlay[:WINDow][:STATe] {ON|OFF|1|0}
:DISPlay[:WINDow][:STATe]?
Description Enables/disables the display of the measurement result.
If you disables the display, the screen is blanked and “DISPLAY NORMAL” is
always displayed on the softkey number 5.
Parameters
Query response {1|0}<newline><^END>
Equivalent key
sequence
[Display Format] - DISPLAY BLANK
Description
ON or 1 (initial value) Enables the display.
OFF or 0 Disables the display.