Keysight E4981A - [:Sense][:Fimpedance]:Contact1:Verify:buf2:Feed:control:interval

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 257
Command Reference
E4981A SCPI Commands
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:FEED:CONTrol:INTerval
Syntax [:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:FEED:CONTrol:INTerval
<numeric>
[:SENSe][:FIMPedance]:CONTact:VERify:BUF2:FEED:CONTrol:INTerval?
Description Sets/Gets the data buffer2 interval for Contact 1.
Parameters
Query response <numeric><newline><^END>
Related commands [:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:DATA? on page 256
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:FEED:CONTrol[:STAT
e] on page 258
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:POINts on page 259
Equivalent key
sequence
No equivalent key is available on the front panel.
<numeric>
Description Interval for Data buffer2.
Range 1 to 100k
Initial value 1
Resolution 1