284 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:SYSTem:PRESet
Syntax :SYSTem:PRESet
Description Resets the instrument to the preset state.
The preset state is different from that when resetting is done by using the *RST
command. For details, refer to Operation Manual, Appendix C “Initial Setting”
(No query)
Related commands *RST on page 160
Equivalent key
sequence
[Preset] - CLEAR SETTING - OK
:SYSTem:RESTart
Syntax :SYSTem:RESTart
Description Reboots the instrument immediately. (No Query)
Equivalent key No equivalent key is available on the front panel.
To Next Page
Loading...
