Keysight E4981A - Display[:Window]:Text2[:Data]:Fmsd[:State]

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 219
Command Reference
E4981A SCPI Commands
:DISPlay[:WINDow]:TEXT2[:DATA]:FMSD[:STATe]
Syntax :DISPlay[:WINDow]:TEXT2[:DATA]:FMSD[:STATe] {ON|OFF|1|0}
:DISPlay[:WINDow]:TEXT2[:DATA]:FMSD[:STATe]?
Description Determines whether to use the fixed point display when displaying both the
primary and secondary parameters. In the following cases, the fixed point
display is always used regardless of this setting (the value of the highest digit is
also fixed).
• When displaying deviation as a percentage in the deviation measurement
mode.
• When displaying the results of D, Q and % of the secondary parameter.
Parameters
Query response {1|0}<newline><^END>
Related commands :DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA on page 216
:CALCulate1:MATH:EXPRession:NAME on page 189
:CALCulate1:MATH:STATe on page 190
:CALCulate2:MATH:EXPRession:NAME on page 192
:CALCulate2:MATH:STATe on page 193
Equivalent key
sequence
[Display Format] - <Secondary Measurement Parameter i.e D/Q/G/Rp/Rs> -
D.P. AUTO|D.P. FIX
Description
ON or 1 Specifies the fixed point display.
OFF or 0 (initial value) Specifies the floating point display.