Keysight E4981A - Format[:Data]

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 225
Command Reference
E4981A SCPI Commands
:FORMat[:DATA]
Syntax :FORMat[:DATA] {ASCii|REAL}
:FORMat[:DATA]?
Description Sets the transfer format of data read out using the following commands:
• :FETCh? on page 220
• :READ? on page 230
• *TRG on page 163
• :DATA[:DATA] on page 208
• [:SENSe]:CORRection:DATA on page 240
• [:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:DATA? on page 253
• [:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:DATA? on page 256
For details on the data transfer formats, refer to “Data Transfer Format” on
page 63.
Parameters
Query response {ASC|REAL}<newline><^END>
Equivalent key
sequence
No equivalent key is available on the front panel.
Description
ASCii (initial value) Specifies the ASCII data transfer format.
REAL Specifies the 64-bit real number data transfer format.