Keysight E4981A - [:Sense]:Correction:multiple[:State]

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 245
Command Reference
E4981A SCPI Commands
[:SENSe]:CORRection:MULTiple[:STATe]
Syntax [:SENSe]:CORRection:MULTiple[:STATe] {ON|OFF|1|0}
[:SENSe]:CORRection:MULTiple[:STATe]?
Description Turns ON/OFF the multi-correction function.
This setup is interlocked with the ON/OFF state of the signal output of the
scanner interface.
Parameters
Query response {1|0}<newline><^END>
Equivalent key
sequence
[Meas Setup] - CORRECTION - MULTI - ON|OFF
Description
ON or 1 Turns ON the multi-correction function.
OFF or 0 (initial value) Turns OFF the multi-correction function.