Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 15
Making Effective Use of This Manual
How To Use This Manual
How To Use This Manual
Chapters 3 to 8 provide task-based descriptions of SCPI commands that are
useful for programming and explain how you can use them. These chapters
contain explanations and sample program listings that you can use to develop
your custom programs. For more information on individual commands, see
Chapter 10, “Command Reference.”
Looking up SCPI commands
Chapter 10, “Command Reference,” contains a complete reference of SCPI
commands. You can look up a particular SCPI command in any of the following
ways:
Lookup by Abbreviated Command Name
The command reference is organized alphabetically
according to the abbreviated name used as the title for each
command’s description.
Lookup by Full Command Name
You can use the index at the end of the manual to find full
command names along with the page numbers where they
appear.
Lookup by Command Function
Table 10-1 on page 307 provides a complete list of
commands by function and indicates the page numbers
where the commands appear in the command reference.
Lookup by Front panel key
Table 10-2 on page 318 provides a complete list of
commands that correspond to the front panel key tree and
indicates the page numbers where the commands appear in
the command reference.
Appendix E “Error Messages”
The Keysight E4981A provides error messages to indicate its operating
status. This appendix describes the error messages of the E4981A in order
of error number. To search for error messages alphabetically, refer to the
Operation Manual.
Some SCPI commands supported by the E4981A have optional syntax
elements. In the command reference conventions, these elements are
enclosed between square brackets ([ ]) or printed in lowercase letters. See
“Syntax” on page 155 for more information.
To Next Page
Loading...
