Keysight E4981A - System:communicate:lan[:Self]:Current:dgateway; System:communicate:lan[:Self]:Current:smask; System:communicate:lan[:Self]:Dgateway

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 277
Command Reference
E4981A SCPI Commands
:SYSTem:COMMunicate:LAN[:SELF]:CURRent:DGATeway?
Syntax :SYSTem:COMMunicate:LAN[:SELF]:CURRent:DGATeway?
Description Returns the current Gateway address. (Query Only)
Query response {“string”}<newline><^END>
Equivalent key No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:CURRent:SMASk?
Syntax :SYSTem:COMMunicate:LAN[:SELF]:CURRent:SMASk?
Description Returns the current Subnet Mask. (Query Only)
Query response {“string”}<newline><^END>
Equivalent key No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:DGATeway
Syntax :SYSTem:COMMunicate:LAN[:SELF]:DGATeway <String>
:SYSTem:COMMunicate:LAN[:SELF]:DGATeway?
Description Sets the static Gateway address.
Parameter
Query response {“string”}<newline><^END>
Equivalent key [System] - SYSTEM CONFIG - MANUAL GATEWAY - ENTER
<String>
Initial (Factory set) value "0.0.0.0"
The value of this command is not changed with *RST and :SYSTem:PRESet
and is only changed with Factory Default reset (available only through
Front Panel).