Keysight E4981A - [:Sense][:Fimpedance]:Contact1:Verify:buf2:Points

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 259
Command Reference
E4981A SCPI Commands
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:POINts
Syntax [:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:POINts <numeric>
[:SENSe][:FIMPedance]:CONTact:VERify:BUF2:POINts?
Description Sets/Gets the number of measurement points of data buffer2.
Parameters
Query response <numeric><newline><^END>
Related commands [:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:DATA? on page 256
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:FEED:CONTrol:INTer
val on page 257
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:FEED:CONTrol[:STAT
e] on page 258
Equivalent key
sequence
No equivalent key is available on the front panel.
<numeric>
Description Number of measurement points for Data buffer 2.
Range 1 to 1000
Initial value 1000
Resolution 1