Keysight E4981A - Calculate1:Comparator:count:multiple:ovld; Calculate1:Comparator:count:ovld

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 179
Command Reference
E4981A SCPI Commands
:CALCulate1:COMParator:COUNt:MULTiple:OVLD?
Syntax :CALCulate1:COMParator:COUNt:MULTiple:OVLD?
Description Reads out the overload count value of the selected channel.
When the multi-correction function is turned off, reads out normal count value
(common value for all channels). In other words, this command has the same
function as the :CALCulate1:COMParator:COUNt:OVLD? command. (Query
only)
Query response {numeric}<newline><^END>
Related commands :CALCulate1:COMParator:COUNt:MULTiple:DATA? on page 177
[:SENSe]:CORRection:MULTiple[:STATe] on page 245
:CALCulate1:COMParator:COUNt[:STATe] on page 180
:CALCulate1:COMParator:COUNt:CLEar on page 175
:CALCulate1:COMParator[:STATe] on page 187
Equivalent key
sequence
No equivalent key is available on the front panel.
:CALCulate1:COMParator:COUNt:OVLD?
Syntax :CALCulate1:COMParator:COUNt:OVLD?
Description Reads out each overload count value. (Query only)
Query response {numeric}<newline><^END>
Related commands :CALCulate1:COMParator:COUNt:DATA? on page 176
:CALCulate1:COMParator:COUNt[:STATe] on page 180
:CALCulate1:COMParator:COUNt:CLEar on page 175
:CALCulate1:COMParator[:STATe] on page 187
Equivalent key
sequence
No equivalent key is available on the front panel.