164 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
E4981A SCPI Commands
This section describes the SCPI commands of the E4981A.
:ABORt
Syntax :ABORt
Description Resets the trigger system and places the trigger sequence in the idle state.
If the trigger system is set to start up successively (ON is specified with the
:INITiate:CONTinuous command), the trigger system starts up immediately
after the transition to the idle state.
For details on the trigger system, refer to “Trigger system” on page 57. (No
query)
Related commands :INITiate[:IMMediate] on page 228
:INITiate:CONTinuous on page 227
Equivalent key
sequence
No equivalent key is available on the front panel.
To Next Page
Loading...
Need help?
General
