Keysight E4981A - System:error[:Next]

280 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:SYSTem:ERRor[:NEXT]?
Syntax :SYSTem:ERRor[:NEXT]?
Description Reads out the oldest error remaining in the E4981A's error queue. The size of
the error queue is 100.
Executing the *CLS command clears errors stored in the error queue. (Query
only)
Query response {numeric},{string}<newline><^END>
{numeric}: Error number
{string}: Error message (a string within double quotation marks (“))
If no error is stored in the error queue, 0 is read out as the error number and
“No error” as the error message.
Related commands *CLS on page 157
Equivalent key
sequence
No equivalent key is available on the front panel.