Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Programming Manual
2 Overview of Remote Control
This chapter provides an overview of the remote control system and the SCPI
commands.
Types of Remote Control System
Depending on the system controller and the interface, you can configure three
types of remote control system as shown in the table below.
System controller Interface Overview
External Controller
(external computer
such as PC)
GPIB System to control the E4981A and other
devices connected via GPIB from the
external controller.
For more information, refer to “GPIB
Remote Control System” on page 19.
LAN System to control the E4981A and other
devices connected via LAN from the
external controller.
For more information, refer to “LAN
Remote Control System” on page 21.
USB System to control the E4981A and other
devices connected via USB from the
external controller.
For more information, refer to “USB
Remote Control System” on page 33.
To Next Page
Loading...
