Keysight E4981A - [:Sense][:Fimpedance]:Contact1:Verify:buf1:Feed:control[:State]

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 255
Command Reference
E4981A SCPI Commands
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:FEED:CONTrol[:STATe]
Syntax [:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:FEED:CONTrol[:STATe]
{NEVer|ALWays}
[:SENSe][:FIMPedance]:CONTact:VERify:BUF1:FEED:CONTrol[:STATe]?
Description Determines whether to get data buffer1 for Contact 1.
Parameters
Query response {NEV|ALW}<newline><^END>
Related commands [:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:DATA? on page 253
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:FEED:CONTrol:INTer
val on page 254
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:POINts on page 256
Equivalent key
sequence
No equivalent key is available on the front panel.
Description
ALWays Feeds the contact check measurement data into the data buffer1
NEVer (Initial
value)
Does not feeds the contact check measurement data into the data
buffer1