Keysight E4981A - Calculate1:Comparator:secondary:state

186 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:CALCulate1:COMParator:SECondary:STATe
Syntax :CALCulate1:COMParator:SECondary:STATe {ON|OFF|1|0}
:CALCulate1:COMParator:SECondary:STATe?
Description Sets whether to enable sorting judgment for the measurement result of the
secondary parameter when using the comparator function.
Parameters
Query response {1|0}<newline><^END>
Related commands :CALCulate1:COMParator:SECondary:LIMit on page 185
:CALCulate1:COMParator:PRIMary:BIN{1-9}:STATe on page 183
:CALCulate1:COMParator[:STATe] on page 187
Equivalent key
sequence
[Meas Setup] - LIMIT TABLE - BIN|2nd - ON|OFF
Description
ON or 1
(initial value)
Enables sorting judgment for the measurement result of the
secondary parameter.
OFF or 0 Disables sorting judgment for the measurement result of the
secondary parameter.