Keysight E4981A - Fetch

220 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:FETCh?
Syntax :FETCh?
Description Reads out the measurement result. The target measurement to read out
depends on the state of the E4981A. (Query Only).
If overload or no contact is detected (that is, the measurement status is 1), the
measured values of the primary parameter and secondary parameter are
9.9E37 and the comparator sorting result is 11.
• During
measurement:
Waits for end of the measurement and then reads out its result.
• Other states: Reads out the result of the immediately preceding
measurement.