216 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA
Syntax :DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA <numeric>
:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA?
Description Sets the value of the highest digit of the primary parameters in the fixed point
display. The parameter is always fixed to the same value, regardless of this
setting, if the following conditions are met:
• Deviation is displayed as a percentage in the deviation measurement mode.
• The resulting D, Q and % of the secondary parameter is displayed.
Parameters
If one of the settable values is not specified for the parameter, the minimum
possible value, which is larger than the specified parameter value, is set. If the
specified parameter exceeds the maximum value, the maximum value is set.
MAX or MIN can be used to specify the parameters.
Query response {numeric}<newline><^END>
Related commands :DISPlay[:WINDow]:TEXT1[:DATA]:FMSD[:STATe] on page 217
:CALCulate1:MATH:EXPRession:NAME on page 189
:CALCulate1:MATH:STATe on page 190
:CALCulate2:MATH:EXPRession:NAME on page 192
:CALCulate2:MATH:STATe on page 193
Equivalent key
sequence
[Display Format] - <Primary Measurement Parameter i.e Cp/Cs> - D.P. POS
INCR+|D.P. POS DECL-
<numeric>
Description The value of the highest digit of the primary parameter.
Range 1a|10a|100a|1f|10f|100f|1p|10p|100p|1n|10n|100n|1u|10u|100u|1
m|10m|100m|1|10|100|1k|10k|100k|1M|10M|100M|1G|10G|100G
|1T|10T|100T|1P|10P|100P|1E
Initial value 1n
To Next Page
Loading...
Need help?
General
