Keysight E4981A - IEEE Common Commands; Cls; Ese

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 157
Command Reference
IEEE Common Commands
IEEE Common Commands
This section describes the IEEE common commands.
*CLS
Syntax *CLS
Description Clears the following: (No query)
•Error Queue
• Status Byte Register
• Standard Event Status Register
• Operation Status Event Register
• Questionable Status Event Register
Equivalent key
sequence
No equivalent key is available on the front panel.
*ESE
Syntax *ESE <numeric>
*ESE?
Description Sets the value of the Standard Event Status Enable Register.
Parameters
Query response {numeric}<newline><^END>
Related commands *SRE on page 162
Equivalent key
sequence
No equivalent key is available on the front panel.
<numeric>
Description Setup value of the register
Range 0 to 255
Initial value 0
Resolution 1