Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 161
Command Reference
IEEE Common Commands
*SAV
Syntax *SAV <numeric>
Description Saves the instrument setups to the register of the specified number on Flash
(internal) memory or USB pen drive (external memory). For details of saved
instrument setups, refer to Operation Manual, Appendix C “Initial Setting” (No
query)
Parameters
If the specified parameter is out of the allowable setup range, an error occurs.
Related commands *RCL on page 160
Equivalent key
sequence
[Save/Recall] - No {1-9} - SAVE
<numeric>
Description Specified number
Range 0 to 9 (Internal Flash Memory)
10 to 19 (External USB Memory)
Resolution 1
To Next Page
Loading...
