Keysight E4981A - [:Sense][:Fimpedance]:Range:auto

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 265
Command Reference
E4981A SCPI Commands
[:SENSe][:FIMPedance]:RANGe:AUTO
Syntax [:SENSe][:FIMPedance]:RANGe:AUTO {ON|OFF|1|0}
[:SENSe][:FIMPedance]:RANGe:AUTO?
Description Selects the measurement range mode from the auto range (automatic range
switching) or hold range (fixed range).
Setting the measurement range (set with the
[:SENSe][:FIMPedance]:RANGe[:UPPer] command) automatically selects
the hold range mode.
Parameters
Query response {1|0}<newline><^END>
Related commands [:SENSe][:FIMPedance]:RANGe[:UPPer] on page 266
Equivalent key
sequence
[Meas Setup] - RANGE - AUTO|HOLD
Description
ON or 1 (initial value) Specifies the auto range mode.
OFF or 0 Specifies the hold range mode.