Keysight E4981A - [:Sense][:Fimpedance]:Contact1:Verify:buf1:Feed:control:interval

254 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:FEED:CONTrol:INTerval
Syntax [:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:FEED:CONTrol:INTerval
<numeric>
[:SENSe][:FIMPedance]:CONTact:VERify:BUF1:FEED:CONTrol:INTerval?
Description Sets/Gets the data buffer1 interval for Contact 1.
Parameters
Query response <numeric><newline><^END>
Related commands [:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:DATA? on page 253
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:FEED:CONTrol[:STAT
e] on page 255
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:POINts on page 256
Equivalent key
sequence
No equivalent key is available on the front panel.
<numeric>
Description Interval for Data buffer1.
Range 1 to 100k
Initial value 1
Resolution 1